Contact Us
Solutions when use Shrink sleeve labeling machines
2011-04-28
Author:Ivy Wong

Solutions when use Shrink sleeve labeling machines

Shrink Sleeve Labeling Machines in the use process prone to the following questions. To solve these problems, we have made a special solution, only for reference:
Shrink film is easy to plot in the center column material
Causes:
● Shrink bad;
● Shrink the size of the center column of the design and size do not meet;
● labeling machine is not adjusted.
Solution:
● Select the high stability, good adjustment and shrink the size of the error of allowing a high degree of labeling machine;
● the factory shrink film quality control.
Sleeves are not allowed
Causes:
● labeling machine is not adjusted;
● Shrink static electricity.
Solution:
● Select the high stability, good adjustment and static low shrink sleeve labeling machine;
● strengthening the operator’s technical training;
● use of static elimination equipment.
Blade is easy to cut to the center column, resulting in blade fracture
Causes:
● Center Column not properly installed;
● Shrink plot in the center column material.
Solution:
● Select the high stability, shrink film is not easy to plot in the center column material sleeve machine;
● Select the center column is easy to install, and you want to wheel clamping center column sleeve machine. (Some brands of sets of non-standard machine wheel clamping center column, must be relaxed to a certain degree of success sets mark) as only relax without clamp, cutter and the center column will result in an incorrect position.
Shrink cut off position is not flat, a flash:
Causes:
● shrink size is greater than the center column of the design size;
● tip is not sharp;
● Blade level is not correct.
● Shrink size control;
● replace the blade;
● Use a good blade horizontal labeling machine.

Blog & News
Recent Posts
Bag In Box With Tap Is a Real Milestone For Liquid Packaging

Bag in box is a type of container for the storage and transportation of liquids, such as wine, water, fruit juice, Oil, etc. A complete Bag in box packaging is equipped with two parts, one part is the plastic bag and the other is the cardboard box.
>read more

Flat Bottom Bag Starts Innovative Packaging Solutions

Flat bottom bag is a popular bag for packaging pet food. It also is called as 8 side seal bag. It has a flat bottom so that it can stand up firmly which makes it different from other ordinary stand up pouch.
>read more

Aluminum Foil Bag Works Well For Dried Mushroom

Aluminum foil bag is working for most of packaging applications. Texin Pack Printing Co. Ltd is doing it for dried mushroom packaging for Thailand market. The bag has three layers structure PET/AL/PE that is a high barrier material working excellent for the dried food to prevent get moisture.
>read more

Shrink Sleeves    Coffee Bags  © 2011 Texin Pack Printing Co., Ltd. All Rights Reserved.    Site map